CP-MP10 is a kind of organo clay rheological additive. It is used in systems containing low, intermediate and high polarity solvents (ketones, ester, ether esters, alcohols, aromatic).
Composition Organic derivative of a montmorillonite clay
Appearance Fine powder, light yellow
Moisture content (105℃,2hr) ≤3.5%
Loss on ignition (1000℃) 42%
Bulk density 0.35~0.45g/cm3
Fineness (<74μm, %) ≥98%
Dispersion fineness (μm) ≤40
The gel is of light colour and high clarity
Easy to use, no need to pregel
Eliminate polar activator
Consistent development of rheology
Can be used to post correct
CP-MP10 is used in the following applications:
Paints，Sealants and adhesive
CP-MP10 can be added directly in powder. The addition is recommended to be before grinding procedure to get the best effectiveness. Pre-gel procedure and polar activator can be eliminated; but if add polar activator and have pre-gel procedure, better performance may be achieved. Addition level is commonly 0.2%~2.0%.