Modified Clay CP-WT Used for Thickening

CP-WT

CP-WT is a special modified clay. It can be dispersed both in aqueous system and solvent system. Especially, It has excellent behavior in water-borne system.

*Excellent water retention

*Fine temperature tolerance. It can disperse in cold water or in hot water.

*High adhesion and strengthening, it can be used as adhesive agent in printing and dyeing in textile industry.

*High thixotropy.

1.       Cement-based mortar

◆  CP-WT has good thickening performance in mortar and can improve mortar’s rheology. With CP-WT, mortar is more slippy and easier for workers to coat on wall. It can Prolong construction time of mortar, and create higher working efficiency. It is helpful for mortar to form high intension during solidification.

2.       Putty

◆  CP-WT has good water-retention performance in putty, and it can prevent putty to be dewatering and crack, and prolong construction time. CP-WT has anti-skinning performance and is helpful for putty to have high intension during solidification.

3.  Thermal insulation mortar (mainly for Bonding mortar and overlay mortar)

◆  With its high water-retention thixotropy and adhesion, CP-WT can prolong construction time of mortar and create higher working efficiency. It gives fine surface and slippery feeling of the mortar and improve surface quality by its shrinkability and anticracking. It is helpful for mortar to form high intension during solidification. and improve bond strength.

4.       Interface treatment binder

◆  CP-WT is good thickening agent for interface treatment binder. It can increase tensile strength and anti-shear strength, and make the binder to have better adhesion and binding strength.

5. Ceramic tile

◆ CP-WT can be used in ceramic tile as water retention agent,adhesive. With its perfect water retention and adhesion, ceramic tile can be strength enough to avoid crack and easier to be constructed.

6.       Emulsion coatings and other water-borne paint.

◆  With its high thickening and thixotropy, it can be used to replace HEC in Emusion coatings and other water-borne paint as rheological additive, film-forming agent, adhesive, emulsifier and stabilizer. It also can be used together with HEC in a proper ratio.

7.       Printing and dyeing in textile.

◆  Used as adhesive

Package and Storage:

◆ Package: Craft paper bag with PE liner.  The weight of each package is 25kg.

◆ Store condition: Keep it in Dry and sealed. places at the TEMP. of 0℃-30℃.

◆ Validity:24months from the date of manufacturing.

Specification:

Note: Viscosity testing condition: water solution at 25℃, tested by Brookfield DV-Ⅱ VISCOMETER, Rotor Rotate speed RV7